Common Parameters

Parameter	Default	Range	Description
Global Scale	100%	0%-10000000%	Controls the overall global scale of the texture within the texture space.
Delta	100%	-500%-500%	Delta is a scaling factor for calculating slope. Increasing or decreasing this value will render a very sharp or very soft bump without having to edit the bump map itself. Results are only applied in the Bump channel as this is for Bump mapping only.
Color			This is the standard Cinema 4D color gradient.
Iterations	10	1-255	A fractal is considered to be infinitely complex. In order to avoid infinite calculation of the fractals complexity during render, Enhanced:C4D allows you to specify up to 255 iterations or calculations of the fractal. In other words, the lowest iterations value (1) will quickly render the least complex fractal and the highest iterations value (255) will create the most complex fractal with a slightly longer render time.
Inside Type	Fore	Back Fore Type A Type B Type C Type D Type E Type F	The Inside Type setting uses the same color gradient as the fractal itself to fill the space inside of the fractal. The “Inside Type” setting applies to all the fractals except Menger, Sierpinsky, & X Flame.
Offset X	0%	-1000%-1000%
Offset Y	0%	-1000%-1000%

	Barnsley Parameter Default Range Description Scale X 0% -1000%-1000%   Scale Y 0% -1000%-1000%   Offset X 0% -1000%-1000%   Offset Y 0% -1000%-1000%   Top
	Julia Parameter Default Range Description Scale X 0% -1000%-1000%   Scale Y 0% -1000%-1000%   Offset X 0% -1000%-1000%   Offset Y 0% -1000%-1000%   Power 2 1-255 The power parameter controls the number of (fractal) lobes for Julia and MandelBrot. A “lobe” is a projection or protrusion of the fractal pattern. With Julia & MandelBrot increasing this setting increases the number of lobes or protrusions. (power = p = x y) Basically, if y=2 (power = p = x2) the fractal has two lobes, if y=3 the fractal has 3 lobes and so on. Top
	Lambda Parameter Default Range Description Scale X 0% -1000%-1000%   Scale Y 0% -1000%-1000%   Offset X 0% -1000%-1000%   Offset Y 0% -1000%-1000%   Top
	Magnet A Parameter Default Range Description Offset X 0% -1000%-1000%   Offset Y 0% -1000%-1000%   Top
	Magnet B Parameter Default Range Description Scale X 0% -1000%-1000%   Scale Y 0% -1000%-1000%   Offset X 0% -1000%-1000%   Offset Y 0% -1000%-1000%   Top
	Magnet C Parameter Default Range Description Offset X 0% -1000%-1000%   Offset Y 0% -1000%-1000%   Top
	Magnet D Parameter Default Range Description Scale X 0% -1000%-1000%   Scale Y 0% -1000%-1000%   Offset X 0% -1000%-1000%   Offset Y 0% -1000%-1000%   Top
	Man of War Parameter Default Range Description Offset X 0% -1000%-1000%   Offset Y 0% -1000%-1000%   Top
	Mandelbrot Parameter Default Range Description Offset X 0% -1000%-1000%   Offset Y 0% -1000%-1000%   Power 2 1-255 The power parameter controls the number of (fractal) lobes for Julia and MandelBrot. A “lobe” is a projection or protrusion of the fractal pattern. With Julia & MandelBrot increasing this setting increases the number of lobes or protrusions. (power = p = x y) Basically, if y=2 (power = p = x2) the fractal has two lobes, if y=3 the fractal has 3 lobes and so on. Top
	Menger Parameter Default Range Description Offset X 0% -1000%-1000%   Offset Y 0% -1000%-1000%   Top
	Newton Parameter Default Range Description Offset X 0% -1000%-1000%   Offset Y 0% -1000%-1000%   Top
	Phoenix Parameter Default Range Description Scale X 0% -1000%-1000%   Scale Y 0% -1000%-1000%   Offset X 0% -1000%-1000%   Offset Y 0% -1000%-1000%   Top
	Sierpinsky Parameter Default Range Description Offset X 0% -1000%-1000%   Offset Y 0 -1000%-1000%   Top
	Spider Parameter Default Range Description Offset X 0% -1000%-1000%   Offset Y 0% -1000%-1000%   Top
	X Flame Parameter Default Range Description Pre Iterations 1 1-255 Controls the number of iterations used to initialize the fractal. Init X 8 0-1000 Defines the initial shift applied to the input co-ordinates. Init X is one of the three seed values. Init P1 1.5 0.01-1000 Controls the initial amplitude of the sine wave. Init P2 1.5 0.01-1000 Controls the ‘phase phase shift’ seed value. Top
Back